Crusher is the main crushing equipment in stone crushing production line. It is used to break large rock into small one. During crushing process, if the stone is stuck in the crusher, how to clear it?
1. Feed too much, too fast
When the stone crusher feeds too much or too fast, the equipment load increases and causes blockage. Therefore, in the process of feeding, we should always pay attention to the deflection Angle of the ammeter pointer. If it exceeds the rated current, it indicates that the motor is overloaded. Long-term overload will burn out the motor. When the stone is stuck in the crusher, the feeding mode can be changed, or the feeding amount can be controlled by increasing the feeder.
2. Discharge not smooth
The discharge pipe is not smooth or blocked too fast, will make the ore crusher discharge port blocked. Improper matching with the conveying equipment will cause the discharge pipe to be blocked. When the ore crusher discharge is not smooth, resulting in equipment failure, should first clear the feed port to change the mismatched conveying equipment, adjust the feeding amount, so that the equipment can work normally.
3. Wearing parts damage
The hammer of the ore crusher is aging, the screen hole is closed or broken, and the water content of the crushed material is too high, which will clog the equipment. Therefore, the seriously aged hammer should be updated regularly in the production to maintain the good working state of the ore crusher. And check the screen regularly, the moisture content of the crushed material should be less than 14%, in order to reduce the blocking material of the ore crusher.
We has more than 30 years in manufacturing crusher machine, like jaw crusher, impact crusher, cone crusher, and mobile crusher, etc. We have the ability to produce complete batch production, independent reduce the production cost of single equipment. The produced stone crusher, coal roller crusher is sold in factory price,save the production cost for the user, creates the higher economic value, welcome the customer contact us: [email protected].